Products

Colour

Natural

Showing 1–8 of 53 results

  • Product Description

    Toyolac ASA TA30 X02 Nat

    Tel. 01425 403543

    Toyolac ASA TA30 X02 Nat (MFI 6)

    High Impact, high viscosity

    ASA (Acrylonitrile Styrene Acrylate) is produced by introducing a grafted acrylate elastomer from BA (Butyl Acrylate) during copolymerisation reaction between Styrene and Acrylonitrile. ASA imparts excellent resistance to discoloration, embrittlement and degradation from ultraviolet (UV) sunlight, atmospheric oxygen and heat from processing compared to ABS. Because of these attributes, ASA is an ideal material for automotive industry as well as many other outdoor applications which require long term performance.

    Special features:

    • Excellent resistance to weathering & ageing.
    • Easy colouration.
    • Easy process-ability.
    • Good chemical resistance.
    • Thermally stable.
    • Durable & superior impact resistance.

    Classification Manufacturer Material Toray Toyolac ASA
  • Product Description

    Toyolac ASA TA10 X01 Nat

    Tel. 01425 403543

    Toyolac ASA TA10 X01 Nat (MFI 17)

    Medium Impact, medium flow grade

    ASA (Acrylonitrile Styrene Acrylate) is produced by introducing a grafted acrylate elastomer from BA (Butyl Acrylate) during copolymerisation reaction between Styrene and Acrylonitrile. ASA imparts excellent resistance to discoloration, embrittlement and degradation from ultraviolet (UV) sunlight, atmospheric oxygen and heat from processing compared to ABS. Because of these attributes, ASA is an ideal material for automotive industry as well as many other outdoor applications which require long term performance.

    Special features:

    • Excellent resistance to weathering & ageing.
    • Easy colouration.
    • Easy process-ability.
    • Good chemical resistance.
    • Thermally stable.
    • Durable & superior impact resistance.

    Classification Manufacturer Material Toray Toyolac ASA
  • Product Description

    Toyolac ASA TA50 X01 Nat

    Tel. 01425 403543

    Toyolac ASA TA50 X01 Nat (MFI 43)

    High Flow grade

    ASA (Acrylonitrile Styrene Acrylate) is produced by introducing a grafted acrylate elastomer from BA (Butyl Acrylate) during copolymerisation reaction between Styrene and Acrylonitrile. ASA imparts excellent resistance to discolouration, embrittlement and degradation from ultraviolet (UV) sunlight, atmospheric oxygen and heat from processing compared to ABS. Because of these attributes, ASA is an ideal material for automotive industry as well as many other outdoor applications which require long term performance.

    Special features:

    • Excellent resistance to weathering & ageing.
    • Easy colouration.
    • Easy process-ability.
    • Good chemical resistance.
    • Thermally stable.
    • Durable & superior impact resistance.

    Classification Manufacturer Material Toray Toyolac ASA
  • Product Description

    Elastollan B80 A15

    Tel. 01425 403543

    Elastollan B80 A15 is 82 shore A polyester based TPU

    Designed specifically for high-performance injection molding and extrusion, the Elastollan B Series contains a hydrolysis stabilizer and has excellent mechanical properties, and products in the series can also be formulated to meet specific certifications. Among these properties is an especially impressive ability to retain elasticity after being in tension (low tensile set).

    It is used predominately for injection moulding applications, being polyester based it also provides superior:

    • Abrasion resistance
    • Toughness
    • Hydrolytic stability
    • Resistance to heat, oil, fuel and solvents
    Classification Manufacturer Material BASF Elastollan
  • Product Description

    Badamid A70 S

    tel. 01425 403543

    General purpose unreinforced injection moulding grade nylon 66 (PA66).

    Badamid A70 S Nylon 66 has the following properties

    • Good Flow behaviour
    • Easy processing
    • Short cycle times
    Classification Manufacturer Material Bada Hispanaplast S.A. Badamid
  • Product Description

    Badamid A70 TM-Z3

    Tel. 01425 403543

    Super Tough chemically impact modified nylon 66

    Badamid A70 TM-Z3 is an unreinforced, high impact resistant, super tough injection moulding and extrusion grade nylon 66.

    Badamid A70 TM-Z3 has the following important properties:

    • Super tough
    • Easy processing
    • Low density
    Classification Manufacturer Material , Bada Hispanaplast S.A. Badamid
  • Product Description

    Badamid B70 FR HF

    Tel. 01425 403543

    Badamid B70 FR HF is an unreinforced, normal viscosity, self-extinguishing PA6 injection moulding grade.

    Badamid B70 FR HF has the following important properties:

    • Halogen and phosphorous-free
    • Light natural colour
    • UL94 V-0
    • Good electrical properties

    Badamid B70 FR HF is used typically in electrical applications such are switches, plugs, clamps and connectors.

    Classification Manufacturer Material , Bada Hispanaplast S.A. Badamid
  • Product Description

    Badamid A70 GF30 FR HF

    Tel. 01425 403543

    Flame retardant nylon 66 (PA66), 30% glass fibre filled, halogen & phosphorous free.

    Badamid A70 GF30 FR HF is a heat stabilised, normal viscosity Nylon 66 (PA66), injection moulding grade, with 30% glass fibres, flame retardant – self extinguishing, halogen & phosphorous free.

    Badamid A70 GF30 FR HF has the following properties:

    • Halogen & phosphorous free flame retardant
    • UL94 v0 at 1.6mm wall thickness
    • High strength & stiffness

    Badamid A70 GF30 FR HF is typically used for switches, and fixing parts in the electrical sector.

    Classification Manufacturer Material , Bada Hispanaplast S.A. Badamid