Showing 9–16 of 76 results
-
Product
Description
Haiplen HEP50 G6 X0 – M2 Certified Polypropylene for Seating
Tel. 01425 403543
Haiplen HEP50 G6 X0 – 30% glass fibre reinforced Polypropylene, chemically coupled, self extinguishing V0 at 3 mm thickness, with very good mechanical properties.
Haiplen HEP50 G6 X0 has been tested and certified to meet the requirements of NF P 92 501, NF P 92 504 and NF P 92 505 and therefore classified M2.
Key Features:
- High mechanical properties
- Good – impact stiffness balance
- Flame retardant
Typical application:
Arena seating
-
Product
Description
Elastollan B80 A15
Tel. 01425 403543
Elastollan B80 A15 is 82 shore A polyester based TPU
Designed specifically for high-performance injection molding and extrusion, the Elastollan B Series contains a hydrolysis stabilizer and has excellent mechanical properties, and products in the series can also be formulated to meet specific certifications. Among these properties is an especially impressive ability to retain elasticity after being in tension (low tensile set).
It is used predominately for injection moulding applications, being polyester based it also provides superior:
- Abrasion resistance
- Toughness
- Hydrolytic stability
- Resistance to heat, oil, fuel and solvents
-
Product
Description
Badamid A70 S
tel. 01425 403543
General purpose unreinforced injection moulding grade nylon 66 (PA66).
Badamid A70 S Nylon 66 has the following properties
- Good Flow behaviour
- Easy processing
- Short cycle times
-
Product
Description
Badamid A2 Black
Tel. 01425 403543
General purpose unreinforced injection moulding grade nylon 66 (PA66).
Badamid Nylon 66 has the following properties
- Good Flow behaviour
- Easy processing
- Short cycle times
-
Product
Description
Badamid A70 FR HF
Tel. 01425 403543
Badamid A70 FR HF is an unreinforced, normal viscosity, self-extinguishing PA66 injection moulding grade.
Badamid A70 FR HF has the following important properties:
- Halogen and phosphorous-free
- UL94 V-0
- Good electrical properties
Badamid A70 FR HF is used typically in electrical applications such are switches, plugs, clamps and connectors.
-
Product
Description
Badamid A70 L
Tel. 01425 403543
Badamid A70 L is a heat stabilised, normal viscosity, impact modified nylon 66 (PA66), injection moulding grade.
Badamid A70 L has the following properties:
- High toughness
- Excellent flow behaviour
-
Product
Description
Badamid A70 TM-Z3
Tel. 01425 403543
Super Tough chemically impact modified nylon 66
Badamid A70 TM-Z3 is an unreinforced, high impact resistant, super tough injection moulding and extrusion grade nylon 66.
Badamid A70 TM-Z3 has the following important properties:
- Super tough
- Easy processing
- Low density
-
Product
Description
Badamid B70 FR HF
Tel. 01425 403543
Badamid B70 FR HF is an unreinforced, normal viscosity, self-extinguishing PA6 injection moulding grade.
Badamid B70 FR HF has the following important properties:
- Halogen and phosphorous-free
- Light natural colour
- UL94 V-0
- Good electrical properties
Badamid B70 FR HF is used typically in electrical applications such are switches, plugs, clamps and connectors.